WS-402-1.png

Toa WS-402 Dual Channel Wireless Microphone Set

  • Handheld Microphone and beltpack provides up to 10 hours continuous usage with the use of only 1 x AA battery ensuring long term cost efficiency
  • Available in dual channel and single channel models
  • Long operating range of approx. 100 m (line of sight)
Product CompositionHandheld wireless microphone x 1
Wireless transmitter x 1
Receiver x 1
Lavalier Microphone x 1
Frequency Range694 – 806 MHz (*1), UHF
Channel SelectableUp to 16 channels (depending on region)
Tunable Frequencies25 kHz Steps
Pilot Tone32.768 kHz
Total Harmonic Distortion<1% @ 1kHz
FunctionIR sync, Channel scan, Battery indicator
AccessoryAC adapter x 1
Microphone holder x 1
Screw driver x 1
Lavalier microphone x 1
Wireless Microphone
Microphone ElementDynamic with cardioid pattern
RF Carrier Power10 mW
Audio Frequency Response80 – 15,000 Hz
Audio Input Level140 dB SPL (Maximum)
Modulation SystemPLL synthesizer
Battery1 AA size alkaline battery, 1.5V
Battery LifeApprox. 10 hours
IndicatorBattery Status LED, 7 Segments LED
FinishResin, coating
DimensionsApprox. 250 x 50 mm
WeightApprox. 245 g (with battery)
Wireless Transmitter
Microphone ElementBack electret condenser; Omni-directional
RF Carrier Power10 mW
Audio Frequency Response50 – 15,000 Hz
Audio Input Level-6dBV (Maximum), mic gain 0dB
Modulation SystemPLL synthesizer
Battery1 AA size alkaline battery, 1.5V
Battery LifeApprox. 10 hours
IndicatorBattery Status LED, 7 Segments LED
FinishResin, coating
Dimensions62 (W) x 100 (H) x 25 (D) mm (with clip)
WeightApprox. 85 g (with battery)

 

Dual Wireless Receiver
Diversity ReceptionAC mains (supplied AC-DC adapter must be used)
Sensitivity10uV at 45dBA S/N
Squelch (SQ)Tone SQ, Carrier SQ and Noise SQ
Audio Frequency Response50 – 15,000Hz
Audio Output Level (Maximum)Balanced (XLR socket): 16dBu
Unbalanced (1/4″ jack socket): 10dBu
Power Supply11-18 VDC 300mA
Dimensions210 (W) × 44 (H) × 202 (D) mm (excluding antenna)
Weight720 g
OptionMounting bracket kit: MB-WT3 (for rack mounting one Dual Wireless Receiver)
MB-WT4 (for rach mounting two Dual Wireless Receiver)

(*1)

BandFrequency
A694 – 703 MHz, UHF
B748 – 758 MHz, UHF
C803 – 806 MHz, UHF
Scroll to Top
Scan the code